Water- and oil-repellent protection for textile seating, ropes, covers and other marine fabrics. FabricCoat helps resist spills and stains without sacrificing breathability.
- Application
- Spray onto clean, dry fabric, Test a concealed area first
- Curing
- 24 hours drying and curing
- Packaging
- 500 mL, confirm local availability
- Surfaces
- Marine fabric seats, ropes, tents and textile surfaces. Not for leather, glass or wood.
What the surface gains.
On the surface
- Water and oil repellency
- Breathable finish
In use
- Stain resistance
- UV resistance
Over time
- Easier care for on-board textiles
Technical data.
| Property | FabricCoat |
|---|---|
| Packaging | 500 mL |
| Durability | Up to 6 months; varies with fabric and exposure |
| Chemical resistance | pH 1–11 |
| Dry film thickness | 75–100 nm |
| Consumption | 80–100 mL/m² |
| Density at 23°C | 0.809 g/cm³ |
| Product pH | 2 |
| Breathability (EN 1062-1) | Category 1 |
| Application temperature | 5–30°C (≤50% RH) |
| Temperature resistance | 110°C |
| Water repellency (ISO 4920) | 100/100 |
| Water contact angle (10 µL) | 144° |
| Water contact angle after 2,000 wet scrubs (ISO 11998) | 126° |
| Water sliding angle (20 µL) | 7° |
| Oil contact angle (10 µL) | 92° |
| Dry to touch | 6 hours |
| REACH compliance | Yes |
How to apply
- Make sure the fabric is dry and free of dust, stains, wax, oil, grease and other contamination. Work in a shaded, well-ventilated area.
- Test a concealed area first, as results vary with the type of fabric.
- Shake gently. Spray roughly 80–100 mL per m² with the standard bottle until the fabric is slightly wet. On fabric that does not absorb the product, spread it lightly with a cloth.
- Allow 24 hours for drying and curing.
Confirm local pack sizes, substrate compatibility and application requirements before use.
Match the coating
to the job.
Share the substrate, environment and required performance. We’ll help confirm the right formulation and application process.
Loading contact form…