A clear ceramic coating for gelcoat, topcoat and plastic parts. MarineCoat One adds a deep gloss while helping the finish resist salt water, UV exposure and everyday contamination.
- Application
- Manual applicator and microfiber buffing
- Curing
- 24 hours protected from water, 48 hours before detergent washing
- Packaging
- 150 mL, confirm local availability
- Surfaces
- Marine gelcoat, topcoat and plastic parts.
What the surface gains.
On the surface
- Water and oil repellency
- High-gloss finish
In use
- UV and chemical resistance
- Easier removal of dirt and exhaust residue
Over time
- Preserves the original colour
- Simplifies exterior maintenance
Technical data.
| Property | MarineCoat One |
|---|---|
| Packaging | 150 mL |
| Appearance | Colourless liquid |
| Durability | Up to 2 seasons above water; up to 1 season underwater |
| Chemical resistance | pH 1–12 |
| Saltwater resistance | Yes |
| Moisture resistance | Yes |
| Pencil hardness (ISO 15184) | 10H |
| Dry film thickness | 800–1,100 nm |
| Consumption | 4–5 mL/m² |
| Density at 23°C | 0.87 g/cm³ |
| Product pH | 5.5–6 |
| Dry to touch | 4 hours |
| Application temperature | 5–30°C (≤50% RH) |
| Temperature resistance | 150°C |
| Water contact angle (10 µL) | 107° |
| Water contact angle after 3,000 wet scrubs (ISO 11998) | 101° |
| Water sliding angle (20 µL) | 11° |
| Oil contact angle (10 µL) | 87° |
| Gloss at 60° (ISO 2813) | 96 on acrylic |
| REACH compliance | Yes |
How to apply
- Clean and dry the surface thoroughly. Work within 5–30°C and no more than 50% relative humidity, wearing the nitrile gloves supplied.
- Shake gently. Fit a suede cloth to the sponge side of the applicator block and pour a little product onto it.
- Spread the coating in crossing passes. When it begins to bead, wipe off the excess with the light grey microfiber cloth in straight strokes. Fold each cloth into quarters to use every face.
- Finish by buffing gently in circles with the dark grey microfiber cloth.
- Keep the surface out of sunlight, weather, water and contamination for 24 hours. Wait 48 hours before any detergent wash while the coating develops its abrasion and chemical resistance.
Confirm local pack sizes, substrate compatibility and application requirements before use.
Match the coating
to the job.
Share the substrate, environment and required performance. We’ll help confirm the right formulation and application process.
Loading contact form…